| |
 |
|
| |
USED vERTICAL MACHINES AVAILABLE
From the beginning as a small group of industry experienced guys and gals, our goal to provide quality and customized service solutions to the machine tool industry has never wavered. At Team Machine, we love what we do and it shows in our people and our work.
|
| |
|
| |
| 1995 Toshiba VMC-55E Vertical Machining Center For Sale | | STOCK #1121-32 |  | 
|  | Vertical Machining Centre
| | SPECIFICATIONS | | | | Table working surface | 55" x 21.7" |
| | Table load capacity | 3300 LB |
| | X axis travel | 43.3" |
| | Y axis travel | 22" |
| | Z axis travel | 22" |
| | Spindle nose to table surface | 7.87" - 29.9" |
| | Distance from column front to spindle centerline | 26.2" |
| | Spindle speed | 20~5000 RPM | | Spindle Gear | 2 |
| | Spindle Taper | # 50 | | Rapid traverse X, Y, Z | 630 IPM |
| | Feed Rate | .1~197 IPM |
| | Tool Shank configuration | Cat # 50 |
| | Tool Magazine capacity | 24 |
| | Max. Tool Diameter | 4.92" |
| | W/adjacent pocket empty | 9.4" | | Max. tool length, from gauge line | 13.8" |
| | Max tool weight | 33 LB |
| | Tool selection method | Soft Randon, |
|
| | Spindle motor, cont./30 min | AC 15/11 Hp |
| | Power | 40 KVA |
| | Over machine height | 124.8" | | Floor space requirements | 150.4" x 154" | | Machine Wt. | 22,000 lbs. |
| | FOB: Our facility, Mississauga | | Specifications are believed to be correct, Team Machine is not responsible for any discrepancies. | |
| |
| Heckert Universal Mill | | STOCK #1121-28 |  | 
| | | Vertical Machines | | SPECIFICATIONS | | With 2 axis Heidenhain DRO | |
| | Power feeds | |
| | 50 Taper | |
| | 16" x 63" T-slotted table | |
| | swivel head | |
| | 1400 RPM | | | 220 Volt | | | 3 phase | |
|
| | FOB: Our facility, Mississauga | | Specifications are believed to be correct, Team Machine is not responsible for any discrepancies. | |
| |
| 1987 Mazak AJV-32 Vertical Machining Centre | | STOCK #1121-23 |  | 
|  | Vertical Machining Centre
| | SPECIFICATIONS | | | | Table working surface | 48.81" x 25.59" |
| | Table load capacity | 1760 LB |
| | X axis travel | 39.37" |
| | Y axis travel | 27.56" |
| | Z axis travel | 18.11" |
| | Spindle nose to table surface | 7.87" - 25.98" |
| | Distance between columns | 31.49" |
| | Spindle speed | 5000 RPM | | Spindle Gear | 2 |
| | Spindle Taper | # 50 | | Rapid traverse X & Y | 945 IPM |
| | Rapid traverse Z | 708 IPM |
| | Tool Shank configuration | Cat # 50 |
| | Tool Magazine capacity | 30 |
| | Max. Tool Diameter | 4.92" |
| | W/adjacent pocket empty | 5.9" |
| | Max. tool length, from gauge line | 13.78" |
| | Max tool weight | 33 LB |
| | Tool selection method | Randon, shortest path |
| | Tool change time tool to tool | 1.8 seconds |
| | Chip to Chip | 8.5 sec | | Spindle motor, cont./30 min | AC 20/25 Hp |
| | Power | 42.3 KVA |
| | Over machine height | 120.7" | | Floor space requirements | 150" x 112" | | Machine Wt. | 19,840 lbs. |
| | FOB: Our facility, Mississauga | | Specifications are believed to be correct, Team Machine is not responsible for any discrepancies. | |
|
|
