| |
 |
|
| |
USED LATHES AVAILABLE
From the beginning as a small group of industry experienced guys and gals, our goal to provide quality and customized service solutions to the machine tool industry has never wavered. At Team Machine, we love what we do and it shows in our people and our work.
|
| |
|
| |
TOSHIBA TMC 13(3) Vertical Boring Mill For Sale
CNC RETROFIT UNDERWAY
STOCK #1121-31 | | | 
|  | Watch Machine On YouTube http://www.youtube.com/watch?v=r2dsKi8i2sc | | | Vertical Boring Mill | | SPECIFICATIONS | | | | Table Diameter | 49.2" [1250mm] |
| | Maximum Swing | 63" [1600mm] |
| | Table Speeds- 2 ranges | 4~200 RPM |
| | Table Power 30min/cont | 60/50HP [45/37KW] |
| | Max Table Load (Turning/Milling) | 20,000/15,000 LBS |
| | Max Turning height | 49.2" [1250mm] |
| | Ram Horizontal travel (X) | -31.5~31.5 [-800~800mm] |
| | Vertical travel of ram (Z) | 39.37" [1000mm] | | Vertical travel off crossrail | 19.68" [500mm] |
| | Live Spindle Speed-2 Ranges | 20~1500 RPM |
| | Live Spindle Power | .20/15 HP [15/11KW] |
| | Rapid Traverse of Rail Head (X and Z) | 196IPM [5000mm/min] |
| | Rapid Traverse of table (C-axis) | 800 deg/min |
| | Rapid Traverse of Crossrail | 16.1IPM [410mm/min] |
| | Feedrate of railhead (X and Z) | 0.01~49IPM[1-1250mm/min] | | Feedrate of the table (C axis) | 1~315 deg/min |
| | Automatic Tool Changer 24 station | 16 Turning/8 Live Milling tools |
| | Tool Selection | Tool Pot Address |
|
| | Chip Conveyor | Lift up and scraper type (table) |
| | Touch Probe | Renishaw |
| | Jib Crane | 222LB 100KG Capacity | | Floor space requirements | 228"x189" | | Machine Wt. | 50,000 lbs. |
| | FOB: Our facility, Mississauga | | Specifications are believed to be correct, Team Machine is not responsible for any discrepancies. | |
| |
 TMC 13(3) Notes
Currently, the TMC 13 is undergoing a mechanical overhaul to freshen up the bearings, seals, ballscrews etc to ensure long life. Our experienced technicians are reassembling each assembly only after it has been inspected and repaired. The machine was originally supplied with a Tosnuc 500 CNC system which was still in operation at the time of removal. This CNC can be reused if you like however our plan is to upgrade all of the electrical systems including a new digital CNC. If you are interested in purchasing the machine, there is still time to select a CNC package of your liking. Whether its a Fanuc, Siemens or Fagor, we can integrate it. This is an opportunity to purchase a quality, 3 axis VTL, with the CNC of your choice at a fraction of the cost of a new comparable machine. TEAM MACHINE TOOLS INC |
| |
| Harrison 16 x 16 Engine Lathe | | STOCK #1121-7 |  |  | | | Lathes | | SPECIFICATIONS | | Recently refurbished: | |
| | Slideways | |
| | Tailstock with Quill | |
| | some tools | |
| | 2,000 RPM | |
| | 575 Volt | | | 3 phase | |
|
| | FOB: Our facility, Mississauga | | Specifications are believed to be correct, Team Machine is not responsible for any discrepancies. | |
|
|
